Structural Fire Fighting Clothing
Specialist Fire Fighter's Clothing
Protective Clothing
Jackets
Sweats, T's & Polos
Search & Rescue > Protective Clothing > Paramedic/First Responder Coverall
639 FlamePro® Paramedic/First Responder Coverall
EN15614:2007
- Front zip fastened with Velcro® FR front flap covering bar-tacked at stress points
- Stand collar with FR meta-aramide internal wadding, throat closure tab fastening
- 2 x Velcro® FR flap closure bellows type chest pockets with drainage holes in bottom of pockets
- 2 division pen pocket with Velcro® FR flap closure on upper left sleeve
- Internal Kermel/FRViscose 50/50 knitted internal cuffs with thumb loop
- Velcro® FR adjustable cuff closure
- Internal adjustable elasticated waist closure in sewn-in tunnel
- Pleated ‘action back’
- 2 x bellows type thigh pockets with Velcro® FR flap closure and drainage holes in bottom of pockets
- Silicon covered FR rubber, Kevlar® backing knee patches with meta-aramide internal wadding for extra protection
- 2 x leg zip with Velcro® FR flap closures and internal gusset on outer legs
- Velcro® FR adjustable ankle closure
- Internal adjustable braces to provide maximum comfort and fit
- 2 bands of 3M FR Scotchlite® 50mm yellow/silver/yellow reflective tapes to lower cuffs
- 2 bands of 3M FR Scotchlite® 50mm yellow/silver/yellow reflective tapes to upper arms
- 1 band of 3M FR Scotchlite® 50mm yellow/silver/yellow reflective tapes around chest & upper back
- 2 bands of 3M FR Scotchlite® 50mm yellow/silver/yellow reflective tapes to lower legs
-
All sewing threads N-tech 70’s meta-aramide Schappe-Spun by Amman & Söhne GmbH & Co. KG
Firefighting Tunics & Combi Jackets
| Label | S | M | L | XL | XXL | XXXL |
| Chest cm | 92 - 100 | 100 -108 | 108 - 116 | 116 - 124 | 124 - 132 | 132 - 140 |
| Height: short | 162 - 170 | 162 - 170 | 162 - 170 | 162 - 170 | 162 - 170 | 162 - 170 |
| Height: regular | 170 - 184 | 170 - 184 | 170 - 184 | 170 - 184 | 170 - 184 | 170 - 184 |
| Height: tall | 184 - 192 | 184 - 192 | 184 - 192 | 184 - 192 | 184 - 192 | 184 - 192 |
| Height: extra tall | > 192 | > 191 | > 192 | > 192 | > 192 | > 192 |
please note: all sizes in centimetres
Firefighting Trouser & Salopettes
| Label | S | M | L | XL | XXL | XXXL |
| Waist cm | 72 -80 | 80 - 88 | 88 - 96 | 96 - 104 | 104 - 112 | 112 - 120 |
| Short: inside leg | 74 | 74 | 74 | 74 | 74 | 74 |
| Regular: inside leg | 79 | 79 | 79 | 79 | 79 | 79 |
| Tall: inside leg | 84 | 84 | 84 | 84 | 84 | 84 |
please note: all sizes in centimetres
SIZING SETS AVAILABLE ON REQUEST
Coveralls
| Label | S | M | L | XL | XXL | XXXL |
| To fit chest | 92 - 100 | 100 - 108 | 108 - 116 | 116 - 124 | 124 - 132 | 132 -140 |
|
Height: |
162 - 170 | 162 - 170 | 162 - 170 | 162 - 170 | 162 - 170 | 162 - 170 |
| Regular | 170 - 184 | 170 - 184 | 170 - 184 | 170 - 184 | 170 - 184 | 170 - 184 |
| Tall | 184 - 192 | 182 - 192 | 182 - 192 | 182 - 192 | 182 - 192 | 182 - 192 |
| XTall | > 192 | > 192 | > 192 | > 192 | > 192 | > 192 |
please note: all sizes in centimetres
- SIZING SETS ARE AVAILABLE FOR ALL FIRE KIT
- XXL & XXXL SIZES +10%; XXXXL + 15%;
- QUOTATIONS GIVEN FOR SPECIAL MEASURES
Note - Sizing & Fit
A fire fighting suit is designed predominantly to protect the wearer from heat and flame but other factors must be taken into consideration when deciding what the correct fit is for the wearer. The high thermal values incorporated into the suits means that it is essential that the fit is not too tight; encouraging an air flow between the body and the suit will help to reduce the heat build-up from the body, particularly when hard physical work is being undertaken. Please take this into account when measuring up.
Shirts
| Label | S | M | L | XL | XXL | XXXL |
| To fit chest | 90 - 96 | 96 - 104 | 104 - 110 | 110 - 116 | 116 - 122 | 122 - 128 |
please note: all sizes in centimetres
Trousers
| Label | 76 | 82 | 88 | 94 | 100 | 106 | 112 | 116 |
| To fit waste " | 30 | 32 | 34 | 36 | 38 | 40 | 42 | 44 |
| Short (inside leg ") | 29 | 29 | 29 | 29 | 29 | 29 | 29 | 29 |
| Regular (inside leg ") | 31 | 31 | 31 | 31 | 31 | 31 | 31 | 31 |
| Tall (inside leg ") | 33 | 33 | 33 | 33 | 33 | 33 | 33 | 33 |
please note: all sizes in inches


FlamePro (UK) Ltd would be happy to advise on any aspect of care.
Countries within the European Union conform to a series of standards carrying the prefix EN and these standards are developed and published by the European Committee CEN/TC162 - www.bsi-global.com/en. This committee is responsible for determining performance criteria under which all products designed by FlamePro are manufactured. For fire protection these standards include:
EN 470-1:1995 Protective clothing for use in welding and allied processes;