Structural Fire Fighting Clothing
Specialist Fire Fighter's Clothing
Protective Clothing
Jackets
Sweats, T's & Polos
Search & Rescue > Protective Clothing > Rope Rescue Coverall
Tel: +44 (0)1332 758 510
Product
Specification
Materials
Sizing
Aftercare
Standards
622 Flamepro® Rope Rescue Coverall
EN343:2003
-
Waterproof breathable unlined coverall
-
Wadded collar and throat tab
-
Action back pleats
-
Radio loop
-
14 cm square patch pocket with Velcro® fastened flap
-
Internal elasticated braces with buckle fastening
-
Velcro® adjustable waist tabs
-
Pockets & waist designed for leg & waist harness
-
3M™ reflective tape to ankles, sleeves & leg
-
Plain ankles with internal elasticated ankle cuff
-
Double face III Kevlar® reinforced knee pads
-
2 side thigh bellows leg pockets with Velcro® fastened flaps
-
Internal knitted cuff with thumb & finger openings in sleeves with plain hems and Velcro® fastened tabs
-
Clean chest for upper body harness
-
Zip pullers on both ends of front zip with Velcro® fastened zip- covering flap
Firefighting Tunics & Combi Jackets
| Label | S | M | L | XL | XXL | XXXL |
| Chest cm | 92 - 100 | 100 -108 | 108 - 116 | 116 - 124 | 124 - 132 | 132 - 140 |
| Height: short | 162 - 170 | 162 - 170 | 162 - 170 | 162 - 170 | 162 - 170 | 162 - 170 |
| Height: regular | 170 - 184 | 170 - 184 | 170 - 184 | 170 - 184 | 170 - 184 | 170 - 184 |
| Height: tall | 184 - 192 | 184 - 192 | 184 - 192 | 184 - 192 | 184 - 192 | 184 - 192 |
| Height: extra tall | > 192 | > 191 | > 192 | > 192 | > 192 | > 192 |
please note: all sizes in centimetres
Firefighting Trouser & Salopettes
| Label | S | M | L | XL | XXL | XXXL |
| Waist cm | 72 -80 | 80 - 88 | 88 - 96 | 96 - 104 | 104 - 112 | 112 - 120 |
| Short: inside leg | 74 | 74 | 74 | 74 | 74 | 74 |
| Regular: inside leg | 79 | 79 | 79 | 79 | 79 | 79 |
| Tall: inside leg | 84 | 84 | 84 | 84 | 84 | 84 |
please note: all sizes in centimetres
SIZING SETS AVAILABLE ON REQUEST
Coveralls
| Label | S | M | L | XL | XXL | XXXL |
| To fit chest | 92 - 100 | 100 - 108 | 108 - 116 | 116 - 124 | 124 - 132 | 132 -140 |
|
Height: |
162 - 170 | 162 - 170 | 162 - 170 | 162 - 170 | 162 - 170 | 162 - 170 |
| Regular | 170 - 184 | 170 - 184 | 170 - 184 | 170 - 184 | 170 - 184 | 170 - 184 |
| Tall | 184 - 192 | 182 - 192 | 182 - 192 | 182 - 192 | 182 - 192 | 182 - 192 |
| XTall | > 192 | > 192 | > 192 | > 192 | > 192 | > 192 |
please note: all sizes in centimetres
- SIZING SETS ARE AVAILABLE FOR ALL FIRE KIT
- XXL & XXXL SIZES +10%; XXXXL + 15%;
- QUOTATIONS GIVEN FOR SPECIAL MEASURES
Note - Sizing & Fit
A fire fighting suit is designed predominantly to protect the wearer from heat and flame but other factors must be taken into consideration when deciding what the correct fit is for the wearer. The high thermal values incorporated into the suits means that it is essential that the fit is not too tight; encouraging an air flow between the body and the suit will help to reduce the heat build-up from the body, particularly when hard physical work is being undertaken. Please take this into account when measuring up.
Shirts
| Label | S | M | L | XL | XXL | XXXL |
| To fit chest | 90 - 96 | 96 - 104 | 104 - 110 | 110 - 116 | 116 - 122 | 122 - 128 |
please note: all sizes in centimetres
Trousers
| Label | 76 | 82 | 88 | 94 | 100 | 106 | 112 | 116 |
| To fit waste " | 30 | 32 | 34 | 36 | 38 | 40 | 42 | 44 |
| Short (inside leg ") | 29 | 29 | 29 | 29 | 29 | 29 | 29 | 29 |
| Regular (inside leg ") | 31 | 31 | 31 | 31 | 31 | 31 | 31 | 31 |
| Tall (inside leg ") | 33 | 33 | 33 | 33 | 33 | 33 | 33 | 33 |
please note: all sizes in inches
Measuring
Please take measurements as shown on the diagram and in accordance with the type of garment required.
Tunics
Height: to top of head
Chest: around the chest under the arms wearing T shirt
Inside leg: from crotch to top of the foot in shoe or boot
Trousers
Height: standing vertically to top of head
Waist: circumference at natural waist (wearing lightweight trousers for fire fighting garments)
Inside leg: from crotch to top of the foot in shoe or boot
Coveralls
Height: standing vertically to top of head
Chest: around the chest under the arms wearing T shirt
Waist: circumference at natural waist (wearing lightweight trousers for fire fighting garments)
Hips: circumference around the fullest part of the hips/seat
Inside leg: from crotch to top of the foot in shoe or boot
If in any doubt please contact FlamePro (UK) Ltd
All FlamePro® garments are constructed using materials and components to meet end user requirements and that conform to the level of protection under which these products are tested. Purchasing officers, responsible for ‘duty of care’, will also have given careful thought to their own risk assessment process prior to purchase. After purchasing it is most important to continue that care process.
The protection offered by garments is strictly controlled by various standards and norms when the products are first manufactured. It is the duty of management to ensure that a robust inspection, care and maintenance programme is instituted to cover the lifetime of the garment. All garments carry sewn-in labels printed with wash/care instructions and it is important that these are strictly followed to ensure continuing compliance with the standards. In addition to following good practice within the PPE Regulation it is also very sensible from an economic perspective that good care is taken of garments. The lifespan of all garments can be extended considerably by good management and this will prove to be a very cost effective way of ensuring that value for money is achieved.
FlamePro (UK) Ltd would be happy to advise on any aspect of care.
FlamePro (UK) Ltd would be happy to advise on any aspect of care.
Countries within the European Union conform to a series of standards carrying the prefix EN and these standards are developed and published by the European Committee CEN/TC162 - www.bsi-global.com/en. This committee is responsible for determining performance criteria under which all products designed by FlamePro are manufactured. For fire protection these standards include:
EN 469:2005/AC2006 Level 2; EN 1486:1996 Protective clothing for fire fighters;
EN 15614:2007 Protective clothing for fire fighters - wildland clothing;
EN ISO:2008 Protective clothing for workers exposed to heat;
EN 471:2003+A1:2007 High-Visibility warning clothing for professional use;
EN 343:2003 Protective clothing, protection against rain,
EN 470-1:1995 Protective clothing for use in welding and allied processes;
EN 470-1:1995 Protective clothing for use in welding and allied processes;
EN 340:2004 EN ISO 11611:2007 Protective clothing for use in welding and allied processes;
EN ISO 11612:2008 Protective clothing; protection against heat & flame
EN ISO 14116:2008 Protective clothing; protection against heat and flame; limited flame spread materials; material assemblies and clothing.
For other areas internationally, in addition to European Standards, there is the International Standards Organisation (ISO) - www.iso.org which publishes the following standards relating to fire fighting:
ISO 11613:1999 Protective clothing for fire fighters, Laboratory test methods and performance requirements;
ISO 15384:2003 Protective clothing for fire fighters, Laboratory test methods and performance requirements for Wildland ISO 15384:2003.
For North America there is the National Fire Protection Agency - www.nfpa.org. All these organizations can be contacted by following the links in this text.
London 20-5-2012 Sun
1:10:10 AM